What are the specific construction details of the GCL?

       What are the specific construction details of the GCL?What are the specific construction details of the GCL, how should the construction be carried out in order to make better use of the GCL, Taian Hongyuan Geosynthetics Co., ltd. as a GCL manufacturer, we take everyone to understand What details should be paid attention to in the construction of GCL!

Treatment of base layer (support layer, cushion layer)

       1) The base layer can be divided into soft base and hard base. Before laying GCL, the necessary equipment should be used to level and compact the base layer, the degree of compaction should be more than 85%, the surface should be flat and smooth, there should be no rocks and other objects protruding more than 2cm, and there should be no obvious voids.

       2) There should be no toxic and harmful substances in the upper layer of the artificial lake foundation.

       3) The surface should be basically dry, and there should be no obvious accumulation of water. If there is any accumulation of water, drainage should be carried out.

       4) The radius of rounding of base layer and positive corner should not be less than 30cm. If the radius of the rounding exceeds 30cm or even vertical, after anchoring around, take measures to fix it and ensure compaction without damaging the waterproof pad.

       5) There is a continuous pipeline that must be fixed and reinforced with concrete to prevent it from shaking.

       6) The anchor trench must be dug and compacted as required.